There are various reasons why deck sealers peel. However, the good thing is that these reasons can be preventable and avoidable. If you want to learn more about this, then continue reading. You might be wondering what exactly is causing your deck sealers to peel. Here are a couple of reasons why:
1. Incorrect Application
The initial application of painting and staining determines how long the material can stick to a surface. Allowing a skilled and experienced professional, https://woodwhiz.com/top-outdoor-wood-sealers to do this job for you can help prevent the deck stain from peeling and loosening as time goes by.
2. Trapped Moisture In Stain
On surfaces, it is possible for deck stains to be over-applied. Wood can absorb so much stain, but if it absorbs too much then excess material can linger and prevent moisture from leaving the wood. If the moisture cannot evaporate, it will linger on the surface and peel the stain away.
3. Lacking Surface Adhesion
Regardless of whether or not you use the right amount of stain, it can peel away if it does not adequately stick to the wood. This can occur in the application process if the deck is not fully dry or clean or if an old stain coat still remains. These two factors can affect how well the stain can stick to the surface.
4. Lackluster Seal and Poor Maintenance
When applying deck seals it is important to consider conditions such as weather, temperatures, and others that can possibly damage the deck stain over time. One way to prevent this is to apply a seal; however, it is important to choose the right seal or else the stain can actually peel much quicker than normal.
How To Avoid Deck Sealings From Peeling?
There are methods and steps that you can definitely take if you want to prevent your deck scalings from peeling. However, this involves having to completely redo your deck so that it lasts long and is sustainable. Here are the steps you may take to accomplish this:
1. Remove the layers that are weathered and peeled
The first step to remedying peeled deck sealings is to remove the layers that are already peeling. From here, you should strip or sand your deck so that it is completely bare again.
2. Clean and rinse the deck
After you finished stripped away the peeled layer and sanding down the deck, you will need to give your deck a nice, good wash. There are various cleaning agents out there that can help assist you with this by removing leftover residue from the first step.
Once you apply this cleaning agent, using a high-pressure washer on the deck is recommended. However, use a lower setting so that you do not damage the wood fibers.
3. Seal the wood
Of course, the last step of this process is to finally seal the wood. Usually, two coats of timber deck oil that are hard-wearing is recommended for this. Each coat must be evenly applied with a roller, paint pad, or a brush.
If all of this seems daunting, then don’t worry. There are skilled and experienced professionals out there who will be able to assist you in this process.